PlayStation® General

[Enjoi_Panda]

I have a Bell Sympatico Wireless DSL Modem/Router. and getting the nat 3 thing. any help? i cant find those settings in the IP thingy.

Message Edited by Enjoi_Panda on 11-09-2007 01:54 PM

[DarkGarfield~]

cheers

[Xandet]

!HELP!

I have an Actiontec router, not a Linksys. Your guide says I need different codes.. what are they? Plase help!!

[Snazzy03~]

i got the ports and everything but it still doesnt work i think i messed upon the connections


Message Edited by Snazzy03 on 11-09-2007 09:10 PM

[Pixelus]

I did everthing jg101987 demonstrated and was still getting NAT 3, but as soon I enabled DMZ listing the IP addy for the PS3 I retested the connection and I was rockin'!! NAT 2 now, but I would never have gotten that far without this guide. Awesome stuff mang... you helped me out tremendously.

[Drexnas]

I got a D-Link DI-524 can you help, either the ip address I use is wrong or something else because I cant ge't it to work/

[I_LUV_HOT_GIRLS~]

To change the NAT type go to the network settings and go to where it says "media server connection" and disable it and then goto "internet connection test" and do the test and make sure that the NAT Type is number 2 and I know that this works because I had to do it. and plus its alot simpler than this but thanks for the guide.

[Oblivion77]

Alright, I have done everything to the dot, disabled my media connection like the poster above told me to do, enabled UPnP, and I still get the goddamned 3.

[Bryce23]

In my experience,  The NAT 3 can also be due to your ISP.  I was having problems with a NAT 3 connection.  I tried everything I could, used the steps in all the guides I found, used all the advice others gave me.  Then I called me internet provider and asked them to do a test connection with a hole in their firewall for my ip.  Well after that I had an instant NAT 2.  So, you might give your ISP a call if you absolutly cannot get anything else to work.

[Wrangler06]

---

77BeTa77 wrote:
Alright, I have done everything to the dot, disabled my media connection like the poster above told me to do, enabled UPnP, and I still get the goddamned 3.

---

after you do everthing the guide says you have to go back into the

router's settings and disable upnp (in the router) because it is no

longer needed once the ports are forwarded, plus the changes you

made won't take affect until you do this.