Ok so everyone knows who is right. I challenge you! Make sure your router is in DMZ and post your WAN IP address!
^yea but putting it in DMZ opens up all the ports and will let hackers have very easier access to your network(in a nuteshell)
No. It wont.
You might want to take some classes in Network Admin/IT.
OMG! you guys are killing me. especially the story about the cat 5 gets interference! If that was true every corperation in the world would of never worked right. heres the scoop- if you want to connect your PS4 using a wireless router you need to add the ports that PS network requires.
My sons connection went from 2 mb/s to 17/mbs download after doing this. but im about ready to cut it back off because i'm getting sick of hearing about his kill streaks.
I have no idea what routers you guys have, but they all have the ability to forward the ports. Google- PS4 router port forwarding. ...and what ever you do, don't listen to the morons advising you to run your router in DMZ. Now look all the money we saved! LOL
your PS4 is assigned a IP address automatically from the DHCP of your router. after your done entering all the ports used for PS4 network.make sure you save and logout. restart your modem and router. unplug then plug in sequence modem then routher. comcast phone/internet customers will have to remove the battery from their EMTA (phone internet router) before reseting or unplugging.
you might not get it right the first time, but all the info is on the world wide web. but, fortunatley i been in the buseness for 15 years.
First of all there is NO risk by putting a console in the DMZ. Please share what services are hackable on a console with it in the DMZ for us idiots...oh wait nevermind, there are NONE!
Second of all, with YOUR setup it will not work. And IF you have been in the business for 15 years this should be rather obvious. How is port forwarding to a device going to work IF the device gets a new IP address each time it reboots because you are using DHCP? Honestly that is a pretty big screw up for someone that has been in the business for 15 years!
OP. It is PERFECTLY safe to put a console in the DMZ. That being said you need to do a few things to make sure the rest of your network is safe.
I am not going to write a tutorial for you, you can look up how to do these tasks.
1: In your router make sure your DHCP settings only allow a small IP address block. What I mean by this is say your router IP address is 192.168.1.1 (usually this is the default) the DHCP range may be 192.168.1.2-192.168.1.255. We want to change that to 192.168.1.100-192.168.1.120. This means only 20 devices can be connected to your network at the same time, you can go higher than 20, this is just an example.
2: Once the DHCP range is set you want to set your PS4 with a static IP address OUTSIDE of that range. Say 192.168.1.80 and you can do this either in the manual setup of the PS4 OR if your router allows reservations.
3: Set the DMZ to be 192.168.1.80. So now ONLY the PS4 can get in to the DMZ and there should be NO risk of a PC getting that address, unless you manually do it and you do NOT want to do that.
IF your router is newer and it has newer firmware you can use UPnP as well. With some older routers and firmware this didn't work so well.
"2000-2016 still in the year 2000 i didnt know we was in the year 3000"
When I first got the PS4 I encountered this problem and realized the DNS was set to my router's gateway (which normally works) but changing it to my ISP's DNS or using Google's DNS dramatically increased bandwidth.
Real world speeds and PSN speeds have never been related without proxy shenanigans. That being said, my PS4 is faster than my PS3 ever was.
Well my ps3 is faster than the ps4 on the same home connection. I think sony isn't giving good speeds due to the amount of ps4 owners. I think they under estimated how many consoles would be sold and their network is too small for the 14 million ps4 owners. Another reason why I have a problem paying for ps4 online when its no better than the free ps3.